Recognize the Symptoms when Matic Car Start Trouble

Autometronicschool. - Do you have matic car now? let's to know more about your car when your car start to trouble. Matic car easy to drive, but the handling is more complicated if trouble.

Matic Transmission (Source: Viva)

According Viva site on Thursday, July 9th, 2015 that Although easy to operate, auto matic also has weaknesses when began to fuss. Therefore, the handling will be a little difficult because of the automatic transmission that uses an electronic system.

The following symptoms can you check whether you matic car started to fuss as reported by the official site of Toyota.

Damage to gear in the automatic transmission is characterized by a sense of jerking when the tooth is inserted. By using the OBD socket on the engine scanner, you can detect this damage.

Usually the main cause of tooth decay is on electronic and mechanical. The car feels compelled immediately because the solenoid pressure as a result of the leaking oil matic and make the oil can not accommodate the gearshift at the desired rpm.

The second symptom is the vibration of the car. It arises because of canvas clutch has begun to wear out or even charred. Compass coupling surface uneven and rub against each other makes canvass error. Thus, when used, the car was shaking.

The trouble shifting from the third gear also should be aware. It was not a big problem, because most car drivers often have problems matic called limp this mode.

But, it's good to immediately bring the car to the garage when the check engine light up, as a sign that something was wrong with the car.

Cars that can not retreat is the most severe symptoms. That is, you can no longer get out of hand or deliberately did not bring it to the workshop. It was triggered by a mechanic at the transmission system is in trouble. Usually, the cause of the car could not back is broken gear lever.

Switch the car is damaged can be marked with the car is stationary or is in parking mode. Another problem that is often made is panic lever would not move, or move but the gear lever remains the same. This could happen if the wires in the gearbox peeling or broken. So, please know more the symptoms when your matic car is starting trouble.